Repara tus cosas Comunidad Tienda

Broan-Nutone NU230BL Filter and Light Replacement

Introducción

This simple guide demonstrates how to replace the filter and oven light in a Broan-Nutone NU230BL oven hood.

Long-term use of an oven hood can cause the quality of parts to deteriorate, in turn causing them not to work as effectively. This is very common and only requires you to replace a few of the worn-out parts, namely the oven hood light and filter.

Prior to starting the guide, make sure that the oven under the hood has been turned off for a significant time to ensure a minimal chance of injury. Never handle hot lightbulbs.

This guide requires little to no technical experience with kitchen appliances, and can all be done by hand.

Qué necesitas

  1. Broan-Nutone NU230BL Filter and Light Replacement, Filter and Light: paso 1, imagen 1 de 1

    • Make sure the fan switch is centered, and the light switch is set to "off" to avoid any injuries.

    Editar

  2. Broan-Nutone NU230BL Filter and Light Replacement: paso 2, imagen 1 de 1

    • Squeeze both ends of the bulb cover to pop it out of the slots.

    Editar

  3. Broan-Nutone NU230BL Filter and Light Replacement: paso 3, imagen 1 de 2 Broan-Nutone NU230BL Filter and Light Replacement: paso 3, imagen 2 de 2

    • Make sure the lightbulb is cool before handling to avoid burns.

    • Unscrew and remove the lightbulb by turning it counterclockwise.

    Editar

  5. Broan-Nutone NU230BL Filter and Light Replacement: paso 4, imagen 1 de 3 Broan-Nutone NU230BL Filter and Light Replacement: paso 4, imagen 2 de 3 Broan-Nutone NU230BL Filter and Light Replacement: paso 4, imagen 3 de 3

    • Twist the latch above the filter clockwise.

    • Slide the filter out by gently pulling it.

    Editar

  6. Broan-Nutone NU230BL Filter and Light Replacement: paso 5, imagen 1 de 3 Broan-Nutone NU230BL Filter and Light Replacement: paso 5, imagen 2 de 3 Broan-Nutone NU230BL Filter and Light Replacement: paso 5, imagen 3 de 3

    • Insert the new filter.

    • Rotate the retaining latch counterclockwise to secure the filter.

    Editar

  7. Broan-Nutone NU230BL Filter and Light Replacement: paso 6, imagen 1 de 2 Broan-Nutone NU230BL Filter and Light Replacement: paso 6, imagen 2 de 2

    • Install the new lightbulb and turn it clockwise.

    Editar

  8. Broan-Nutone NU230BL Filter and Light Replacement: paso 7, imagen 1 de 2 Broan-Nutone NU230BL Filter and Light Replacement: paso 7, imagen 2 de 2

    • Reinsert the lightbulb cover by pressing both sides and fitting the cover's tabs into the slots.

    Editar
Conclusión

Your range hood is good-to-go!

Una persona más ha completado esta guía.

Autor

con 1 otro colaborador

Mahdi M

Miembro Desde 01/17/22

169 Reputación

1 Guía escrita

Insignias: 5

+ 2 más insignias

Equipo

York University, Team P-21, O'Regan Winter 2022 Miembro de York University, Team P-21, O'Regan Winter 2022

YORK-O'REGAN-W22SPG21

1 Miembro

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 9

Ultimos 30 días: 23

Todo El Tiempo: 710