Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove three 8mm screws from the left side of the device.
-
Remove four 8mm screws from the right side of the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Apply pressure on the SD card to pop it out of the port.
-
Remove the card by pulling it out.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Press down on the top cover of the device and slid it towards you until you see a slight gap created.
-
Lift the top cover off.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Slide the body case back away from the bottom.
-
Pull up the body case to remove it from the bottom.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.