Saltar al contenido principal

Brightsign 4k Outer Shell Replacement

Qué necesitas

  1. Brightsign 4k Outer Shell Replacement, Outer Shell: paso 1, imagen 1 de 3 Brightsign 4k Outer Shell Replacement, Outer Shell: paso 1, imagen 2 de 3 Brightsign 4k Outer Shell Replacement, Outer Shell: paso 1, imagen 3 de 3
    • Remove three 8mm screws from the left side of the device.

    • Remove four 8mm screws from the right side of the device.

  2. Brightsign 4k Outer Shell Replacement: paso 2, imagen 1 de 3 Brightsign 4k Outer Shell Replacement: paso 2, imagen 2 de 3 Brightsign 4k Outer Shell Replacement: paso 2, imagen 3 de 3
    • Apply pressure on the SD card to pop it out of the port.

    • Remove the card by pulling it out.

  3. Brightsign 4k Outer Shell Replacement: paso 3, imagen 1 de 3 Brightsign 4k Outer Shell Replacement: paso 3, imagen 2 de 3 Brightsign 4k Outer Shell Replacement: paso 3, imagen 3 de 3
    • Press down on the top cover of the device and slid it towards you until you see a slight gap created.

    • Lift the top cover off.

  4. Brightsign 4k Outer Shell Replacement: paso 4, imagen 1 de 3 Brightsign 4k Outer Shell Replacement: paso 4, imagen 2 de 3 Brightsign 4k Outer Shell Replacement: paso 4, imagen 3 de 3
    • Slide the body case back away from the bottom.

    • Pull up the body case to remove it from the bottom.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Zackery

Miembro Desde 02/15/18

347 Reputación

2 Guías creadas

Equipo

USF Tampa, Team S17-G6, Boczar Spring 2018 Miembro de USF Tampa, Team S17-G6, Boczar Spring 2018

USFT-BOCZAR-S18S17G6

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 235