Saltar al contenido principal

Briggs and Stratton 675 Series Repair Air Filter Replacement

Qué necesitas

  1. Briggs and Stratton 675 Series Repair Air Filter Replacement, Air Filter: paso 1, imagen 1 de 1
    • Make sure the the engine is off and the spark plug wire is removed and away from the spark plug before beginning.

    • Use a Flathead #4 screw driver to remove the 40mm screw that holds the air filter case in place.

  2. Briggs and Stratton 675 Series Repair Air Filter Replacement: paso 2, imagen 1 de 1
    • Use your hands to pull the air filter case out of the hinge at the bottom.

  3. Briggs and Stratton 675 Series Repair Air Filter Replacement: paso 3, imagen 1 de 1
    • Simply remove the air filter with your hands.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Equipo

Cal Poly, Team 6-31, Amido Winter 2015 Miembro de Cal Poly, Team 6-31, Amido Winter 2015

CPSU-AMIDO-W15S6G31

4 Miembros

13 Guías creadas

2 comentarios

Good information, although it didn't resolve my issue. Thanks for sharing

all2thegoodpromo - Contestar

This is a power wash motor water will not come out

hdoggett Doggett - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 35

Ultimos 30 días: 166

Todo El Tiempo: 19,232