Saltar al contenido principal

Brentwood TS-292B Power Cable Replacement

Qué necesitas

  1. Brentwood TS-292B Power Cable Replacement, Power Cable: paso 1, imagen 1 de 1
    • Remove the five 6mm screws on the bottom of the toaster with a Phillips #2 screw driver.

  2. Brentwood TS-292B Power Cable Replacement: paso 2, imagen 1 de 1
    • To remove the toasting lever, pull the lever away from the toaster.

  3. Brentwood TS-292B Power Cable Replacement: paso 3, imagen 1 de 1
    • Unplug the wire connecting the casing to the circuit board to fully remove the toaster casing.

  4. Brentwood TS-292B Power Cable Replacement: paso 4, imagen 1 de 1
    • Unscrew the wire bracket with a Phillips #2 screw driver.

  5. Brentwood TS-292B Power Cable Replacement: paso 5, imagen 1 de 1
    • Pull back on the black tab that is holding the circuit board in place.

    • While pulling the tab back, lift up on the circuit board.

  6. Brentwood TS-292B Power Cable Replacement: paso 6, imagen 1 de 1
    • Desolder the power wire connections on the circuit board.

    • Desolder in a well ventilated area.

    • The tip of soldering iron is hot handle with caution.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 146