Repara tus cosas Comunidad Tienda

Braven BRV-1s Front Speaker Screen Replacement

Introducción

Learn how to properly remove a damaged speaker screen in order to replace it.

Qué necesitas

  1. Braven BRV-1s Front Speaker Screen Replacement, Front Speaker Screen: paso 1, imagen 1 de 2 Braven BRV-1s Front Speaker Screen Replacement, Front Speaker Screen: paso 1, imagen 2 de 2

    • Using a 1.5mm hex screwdriver start unscrewing the 0.6mm screws holding down the front replacement screen

    • Repeat the unscrewing process for the other 7 screws

    Editar

  3. Braven BRV-1s Front Speaker Screen Replacement: paso 2, imagen 1 de 1

    • Use a plastic spudger to pry off the front speaker screen

    Editar

  4. Braven BRV-1s Front Speaker Screen Replacement: paso 3, imagen 1 de 1

    • Peel off the front screen using your fingers after using the plastic prying tool/spudger

    • Be careful not to damage the glue underneath the front speaker screen, damaging the glue may cause the device to no longer be waterproof.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 888