Repara tus cosas Comunidad Tienda

Braven BRV-1M Motherboard Replacement

Introducción

A damaged or disconnected motherboard can lead to potential component or entire device failure. One can reference this guide to learn how to successfully remove and replace the motherboard found within the device.

Qué necesitas

  1. Braven BRV-1M Motherboard Replacement, Outer Casing: paso 1, imagen 1 de 1

    • To remove the outer casing, use a 3mm Hex bit to remove the 4 large 12mm Hex screws on both sides of the device.

    Traducir

  2. Braven BRV-1M Motherboard Replacement: paso 2, imagen 1 de 1

    • Using the Metal Spudger, carefully pry each side of the rubber casing away from the device.

    • A little resistance should be felt, but not enough to bend the spudger.

    Traducir

  3. Braven BRV-1M Motherboard Replacement: paso 3, imagen 1 de 1

    • To remove the inner plastic casing, use a Phillips #00 head bit to remove the 16 small 9mm screws surrounding the top side of the device.

    Traducir

  5. Braven BRV-1M Motherboard Replacement: paso 4, imagen 1 de 1

    • Carefully lift away the housing and replace the broken casing/component. Replace using the new casing.

    Traducir

    And where do I purchase a new outer case? My on off button rubber perished.

    Louise Maree - Contestar

  6. Braven BRV-1M Motherboard Replacement, Motherboard: paso 5, imagen 1 de 1

    • To remove the motherboard, proceed to unscrew the 3 Phillips #00 bit type, 13mm long screws located on both sides of the motherboard.

    Traducir

  7. Braven BRV-1M Motherboard Replacement: paso 6, imagen 1 de 1

    • Then, proceed to unscrew the 5 Phillips #00 bit type, 9mm long screws located on the face of the charging dock.

    Traducir

  8. Braven BRV-1M Motherboard Replacement: paso 7, imagen 1 de 1

    • Disconnect the two 4-pin auxiliary button register cables connected on both sides of the motherboard.

    Traducir

  9. Braven BRV-1M Motherboard Replacement: paso 8, imagen 1 de 1

    • Once disconnected, carefully remove the motherboard by pulling upwards.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Erik Oliva

Miembro Desde 02/14/18

607 Reputación

6 Guías creadas

Insignias: 4

+1 mas insignia

Equipo

USF Tampa, Team S2-G1, Eyestone Spring 2018 Miembro de USF Tampa, Team S2-G1, Eyestone Spring 2018

USFT-EYESTONE-S18S2G1

4 Miembros

6 Guías creadas

Un comentario

i need to eletric scheme!

anonymous 5979 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 227