Saltar al contenido principal

Braun 5514 Motor Replacement

Qué necesitas

  1. Braun 5514 Motor Replacement, Motor: paso 1, imagen 1 de 1
    • Remove any attached trimmer heads by gripping and pulling away from the body.

  2. Braun 5514 Motor Replacement: paso 2, imagen 1 de 3 Braun 5514 Motor Replacement: paso 2, imagen 2 de 3 Braun 5514 Motor Replacement: paso 2, imagen 3 de 3
    • Insert an opening pick between the top plate and the grey separator.

    • Slide the opening pick around the perimeter of the plate to release the hidden clips.

  3. Braun 5514 Motor Replacement: paso 3, imagen 1 de 1
    • Remove the four 7mm Torx T6 screws attaching the grey plastic frame to the black plastic casing.

  4. Braun 5514 Motor Replacement: paso 4, imagen 1 de 2 Braun 5514 Motor Replacement: paso 4, imagen 2 de 2
    • Use the opening pick to lift the grey frame from the black casing.

  5. Braun 5514 Motor Replacement: paso 5, imagen 1 de 2 Braun 5514 Motor Replacement: paso 5, imagen 2 de 2
    • Remove the circuit board assembly from the frame.

  6. Braun 5514 Motor Replacement: paso 6, imagen 1 de 1
    • Pull the small black plastic piece out of the frame.

  7. Braun 5514 Motor Replacement: paso 7, imagen 1 de 2 Braun 5514 Motor Replacement: paso 7, imagen 2 de 2
    • Desolder the wires attached to the motor.

    • Remember where the red and black wires attach in case the replacement motor doesn't have it labeled.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Equipo

IUPUI, Team S2-G2, Harley Summer 2018 Miembro de IUPUI, Team S2-G2, Harley Summer 2018

IUPUI-HARLEY-SU18S2G2

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 10

Ultimos 30 días: 70

Todo El Tiempo: 2,993