Repara tus cosas Comunidad Tienda

Bottom Cover

Qué necesitas

  1. Bottom Cover, Battery: paso 1, imagen 1 de 1

    • Before proceeding, power down your Laptop and remove the power cable.

    • Close the display and lay it on a flat surface, top-side down.

    Editar

  2. Bottom Cover: paso 2, imagen 1 de 1

    • Unlock the battery by sliding the battery lock to the unlock part.

    Editar

  4. Bottom Cover: paso 3, imagen 1 de 1

    • Slide the middle lock to the right and the battery will pop up.

    Editar

  5. Bottom Cover: paso 4, imagen 1 de 1

    • If you want to replace the battery and nothing else then now is the time to do so.

    • Once the battery hatch is unlocked you can now safely remove the battery.

    Editar

  6. Bottom Cover, Bottom Cover: paso 5, imagen 1 de 1
    Herramienta utilizada en este paso:
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    Comprar

    • Use a Philips J1 driver to remove eight screws securing the bottom case.

    • Remove all of the 8 screws and the bottom panel should pop off.

    Editar

  7. Bottom Cover: paso 6, imagen 1 de 1

    • After that you are in and now can change most of the components, which we also have tutorials for.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Regome

Miembro Desde 01/20/23

767 Reputación

7 Guías creadas

Insignias: 7

+ 4 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 5

Todo El Tiempo: 71