Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Bose SoundLink Mini Front/Back Protective Grille Replacement

Introducción

Use this guide to replace the front or back mesh grilles. Make sure you have the required tools. The first time you remove a grille might be a little difficult due to some glue holding it in place. Be careful when removing, as the grille may bend easily.

Qué necesitas

  1. Bose SoundLink Mini Front/Back Protective Grille Replacement, Front/Back Protective Grille: paso 1, imagen 1 de 1

    • Insert the Metal Spudger between the rubber edge on the grille and the aluminum casing.

    • Place Metal Spudger in the location shown.

    Traducir

  2. Bose SoundLink Mini Front/Back Protective Grille Replacement: paso 2, imagen 1 de 2 Bose SoundLink Mini Front/Back Protective Grille Replacement: paso 2, imagen 2 de 2

    • Slowly pry up the grille until the two tabs shown pop out.

    • Be very gentle, the grille will bend.

    Traducir

  4. Bose SoundLink Mini Front/Back Protective Grille Replacement: paso 3, imagen 1 de 2 Bose SoundLink Mini Front/Back Protective Grille Replacement: paso 3, imagen 2 de 2

    • The grille is attached to the speaker with double sided sticky tape. To remove the grill gently pull upward while keeping tension to the right.

    • Be very gentle, the grille will bend.

    Traducir

  5. Bose SoundLink Mini Front/Back Protective Grille Replacement: paso 4, imagen 1 de 2 Bose SoundLink Mini Front/Back Protective Grille Replacement: paso 4, imagen 2 de 2

    • Repeat steps to remove the back grille.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

9 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Jordan Smith

Miembro Desde 10/01/15

895 Reputación

4 Guías creadas

Insignias: 17

+ 14 más insignias

Equipo

Cal Poly, Team 1-23, Maness Fall 2015 Miembro de Cal Poly, Team 1-23, Maness Fall 2015

CPSU-MANESS-F15S1G23

4 Miembros

21 Guías creadas

6 comentarios

Has anyone an idea where to buy new meshs for the dark version of Bose SL II ? My are badly scratched and I'd like to replace them.. dont know where to buy them though..

krisskuli - Contestar

Hi brilliant advise. Where can I get hold of the front perl white grill? I can't find it anywhere!

Peter Bacher - Contestar

Hi brilliant advise. Where can I get hold of the front perl white grill of my soundlink mini ? I can't find it anywhere!

Peter Bacher - Contestar

Where can I purchase the grill?

Ronald Roden Jr - Contestar

Take out the grills, put a peace of tape on logo properly cut it, and repaint it. Apply a thin coat of spray paint only.

Pranjal Vishwakarma - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 26

Ultimos 30 días: 115

Todo El Tiempo: 12,492