Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the four 17.57mm screws from the bottom of the case with a PH0 screwdriver.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully separate the two halves of the casing by pulling them apart at the seam.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the rectangular black adhesive foam on top of the battery by peeling it away from the battery.
-
Desolder the battery connections from the circuit board.
-
Replace the dead battery with a new 3.7 volt lithium polymer battery.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.
4 comentarios
hi my name is Eugene. I have a question . My skateboard remote is gone. remotes are not sold in my country. what should i do how can i use the skateboard . we sell remotes from another company. how can it be adjusted to my boosted mini . help me solve the issue please
You can't use 3rd party remotes with proprietary Boosted products.
Verified this works with V2 and V3 remotes as well. I did a R29 and it works great. Thank you for the info.
hi my name is Eugene. I have a question . My skateboard remote is gone. remotes are not sold in my country. what should i do how can i use the skateboard . we sell remotes from another company. how can it be adjusted to my boosted mini . help me solve the issue please.
Evgeny Bubnov - Contestar