Saltar al contenido principal

Blu Studio Selfie Battery Replacement

Qué necesitas

  1. Blu Studio Selfie Battery Replacement, Rear Cover: paso 1, imagen 1 de 1
    • Make sure your phone is powered off.

    • Turn the front of the phone away from you.

    • Run your fingers along the sides of the phone to identify where the case can be pulled apart.

  2. Blu Studio Selfie Battery Replacement: paso 2, imagen 1 de 1
    • Insert the flat end of your plastic opening into the crevice you found along the side of the phone.

    • Gently apply pressure until you feel the back case pop free of the phone.

    • Continue the previous two steps around the rest of the phone until the case is fully removed.

  3. Blu Studio Selfie Battery Replacement, Battery: paso 3, imagen 1 de 2 Blu Studio Selfie Battery Replacement, Battery: paso 3, imagen 2 de 2
    • Identify the crevice at the bottom of the battery.

    • There should be enough space for you to fit your fingernail between the battery and the phone.

    • Gently lift the battery free of the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Stacy Kam

Miembro Desde 01/20/16

630 Reputación

5 Guías creadas

Equipo

USF Tampa, Team 10-1, Remmell Spring 2016 Miembro de USF Tampa, Team 10-1, Remmell Spring 2016

USFT-REMMELL-S16S10G1

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 9

Ultimos 30 días: 9

Todo El Tiempo: 1,324