Saltar al contenido principal

Blu Studio HD 6.0 MicroSD Card Replacement

Qué necesitas

  1. Blu Studio HD 6.0 MicroSD Card Replacement, Rear Case: paso 1, imagen 1 de 1
    • Begin by making sure your Blu Studio is turned off.

  2. Blu Studio HD 6.0 MicroSD Card Replacement, Back Panel.: paso 2, imagen 1 de 2 Blu Studio HD 6.0 MicroSD Card Replacement, Back Panel.: paso 2, imagen 2 de 2
    • To begin the removal of your back panel, first locate the lift tab on the bottom-right corner.

  3. Blu Studio HD 6.0 MicroSD Card Replacement: paso 3, imagen 1 de 2 Blu Studio HD 6.0 MicroSD Card Replacement: paso 3, imagen 2 de 2
    • Next, gently slide your thumb (or plastic tool if you prefer) down the seem running the length of your Blu Studio until the rear panel is completely removed.

    • Your rear panel should be placed nearby and in a safe location until you are finished with your task.

  4. Blu Studio HD 6.0 MicroSD Card Replacement, Insert the Micro-SD Card: paso 4, imagen 1 de 3 Blu Studio HD 6.0 MicroSD Card Replacement, Insert the Micro-SD Card: paso 4, imagen 2 de 3 Blu Studio HD 6.0 MicroSD Card Replacement, Insert the Micro-SD Card: paso 4, imagen 3 de 3
    • Find the Micro-SD card slot which is under the right SIM card slot.

    • Line up the gold pins of the Micro-SD card with the pins of the card slot. If pins in the slot are hidden, then insert the Micro-SD card with the "MicroSD" print up and the pins facing the slot.

    • Slide the card into the slot until you either hear a clicking noise or until the card does not move anymore. Do not apply too much force; gently slide it in and stop immediately when it does not move anymore.

  5. Blu Studio HD 6.0 MicroSD Card Replacement, Turn the phone on: paso 5, imagen 1 de 1
    • Your phone should boot up and ask you to format your Micro-SD Card.

    • Format the card and you're good to go.

    • If your phone does not recognize the card, ensure that the gold pins of the card aligned with the gold pins on the phone's Micro-SD slot.

    • If the card is installed correctly, the card may be faulty. If so contact the Micro-SD card manufacturer.

    My SD card was working just fine, then suddenly doesn't read. Attempted to remove and reinsert, but still doesn't read.

    Richard Cockrum - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

8 personas más completaron esta guía.

Alec

Miembro Desde 09/23/14

617 Reputación

2 Guías creadas

Equipo

USF Tampa, Team 9-1, Blackwell Fall 2014 Miembro de USF Tampa, Team 9-1, Blackwell Fall 2014

USFT-BLACKWELL-F14S9G1

3 Miembros

8 Guías creadas

Un comentario

Very clear instructions and step by step guidance

Laszlo Tihanyi - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 16,291