Repara tus cosas

Derecho a reparar

Tienda

Blu Grand M Plastic Plate Replacement

Escrito Por: Cameron Retzlaff (y 3 de otros participantes)
  • Comentarios: 1
  • Favoritos: 0
  • Terminaciones: 1

Dificultad

Moderado

Pasos

6

Tiempo Requerido

Sugerir un tiempo??

Secciones

2

Banderas

2

Prerequisite Only

Sólo Prerrequisito

Por favor, ten en cuenta que esta guía es sólo un prerrequisito para otras guías.

Missing Details

Faltan Detalles

Algunos de los detalles de este guía están ausentes. Ayuda a los usuarios agregando herramientas, dificultad o tiempo.

Introducción

Prerequisite-only guide for removing the plastic plate covering the camera.

  1. Remove the two plastic plates with a plastic opening tool. Remove the two plastic plates with a plastic opening tool.

    • Remove the two plastic plates with a plastic opening tool.

    Editar

  2. Using a Phillips #000 screwdriver, remove the 3mm screws. Be sure to do this for the top and bottom of the phone.

    • Using a Phillips #000 screwdriver, remove the 3mm screws. Be sure to do this for the top and bottom of the phone.

    Editar

  4. Remove SIM card tray with paperclip or SIM card tray removal tool. Push down on the phone beside the camera and up on the backplate with your thumbs to remove the back plate. Remove adhesive if necessary. Push down on the phone beside the camera and up on the backplate with your thumbs to remove the back plate. Remove adhesive if necessary.

    • Remove SIM card tray with paperclip or SIM card tray removal tool.

    • Push down on the phone beside the camera and up on the backplate with your thumbs to remove the back plate. Remove adhesive if necessary.

    Editar

  5. There is a patch of adhesive underneath the battery, which can make it difficult to remove. Place the plastic opening tool in the highlighted indent, and push up on the battery to remove it.

    • There is a patch of adhesive underneath the battery, which can make it difficult to remove.

    • Place the plastic opening tool in the highlighted indent, and push up on the battery to remove it.

    Editar

  6. Remove the yellow plastic tape using a pair of tweezers. Remove the yellow plastic tape using a pair of tweezers.

    • Remove the yellow plastic tape using a pair of tweezers.

    Editar

  7. Use a Phillips #000 screwdriver to remove two black 4.0mm screws. Use a Phillips #000 screwdriver to remove 2 silver 4.0mm screws Remove the plastic cover along the top by tugging on it on the corner as shown.

    • Use a Phillips #000 screwdriver to remove two black 4.0mm screws.

    • Use a Phillips #000 screwdriver to remove 2 silver 4.0mm screws

    • Remove the plastic cover along the top by tugging on it on the corner as shown.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Cameron Retzlaff

Miembro Desde 17/09/18

608 Reputación

5 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

Washington State, Team S9-G2, Hope Fall 2018 Miembro de Washington State, Team S9-G2, Hope Fall 2018

WSU-HOPE-F18S9G2

3 Miembros

5 Guías creadas

0 comentarios

Agregar un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 94