Introducción

This guide will be useful in replacing the front housing for the Blackberry RIM 7250. For this guide, you will need a plastic opening tool and a Torx #6 screwdriver head.

Partes

No se requieren partes.

  1. Push the release button down and away from the device. Slide the cover off toward the bottom of the device, revealing the battery compartment. Slide the cover off toward the bottom of the device, revealing the battery compartment.
    • Push the release button down and away from the device.

    • Slide the cover off toward the bottom of the device, revealing the battery compartment.

  2. Place your finger in the groove next to the battery. Lift your finger up to eject the battery from the battery compartment. Lift your finger up to eject the battery from the battery compartment.
    • Place your finger in the groove next to the battery.

    • Lift your finger up to eject the battery from the battery compartment.

  3. Remove the battery from the compartment. Remove the battery from the compartment. Remove the battery from the compartment.
    • Remove the battery from the compartment.

  4. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  5. Remove  the four 10.7 mm Torx T6 screws. Remove  the four 10.7 mm Torx T6 screws.
    • Remove the four 10.7 mm Torx T6 screws.

  6. Remove the two 5 mm Torx T6 screws. Remove the two 5 mm Torx T6 screws.
    • Remove the two 5 mm Torx T6 screws.

  7. Hold the phone with one hand, with the bottom facing toward you.
    • Hold the phone with one hand, with the bottom facing toward you.

    • For both clips, insert the plastic opening tool and push away from you.

    • You will hear a clicking sound for each clip that is released.

  8. Grab the back housing from the bottom and lift the housing away from you. Grab the back housing from the bottom and lift the housing away from you. Grab the back housing from the bottom and lift the housing away from you.
    • Grab the back housing from the bottom and lift the housing away from you.

  9. Place your thumb on the bottom rectangle and your index finger on the top rectangle. Squeeze your fingers together to release the internals from the front housing.
    • Place your thumb on the bottom rectangle and your index finger on the top rectangle.

    • Squeeze your fingers together to release the internals from the front housing.

  10. Pull the two pieces apart to separate the front housing from the internals. Pull the two pieces apart to separate the front housing from the internals. Pull the two pieces apart to separate the front housing from the internals.
    • Pull the two pieces apart to separate the front housing from the internals.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Noah Eckert

Miembro Desde 05/11/18

519 Reputación

5 Guías creadas

Equipo

IUPUI, Team S2-G4, Baechle Fall 2018 Miembro de IUPUI, Team S2-G4, Baechle Fall 2018

IUPUI-BAECHLE-F18S2G4

3 Miembros

5 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 27