Saltar al contenido principal

Blackberry Curve 9300 Speaker Replacement

Qué necesitas

  1. Blackberry Curve 9300 Speaker Replacement, Battery: paso 1, imagen 1 de 1
    • Place your Blackberry face down in front of you.

  2. Blackberry Curve 9300 Speaker Replacement: paso 2, imagen 1 de 1
    • Locate the indent on the bottom of the back cover.

    • Use your fingernail to lift and remove the back cover.

  3. Blackberry Curve 9300 Speaker Replacement: paso 3, imagen 1 de 1
    • From the top, use your fingernail to lift and remove the battery.

  4. Blackberry Curve 9300 Speaker Replacement, Keyboard: paso 4, imagen 1 de 1
    • Use the T6 Torx screwdriver to unscrew the two 5mm screws highlighted.

  5. Blackberry Curve 9300 Speaker Replacement: paso 5, imagen 1 de 2 Blackberry Curve 9300 Speaker Replacement: paso 5, imagen 2 de 2
    • Place the phone face up and use tweezers to securely grip and lift the screen upwards.

  6. Blackberry Curve 9300 Speaker Replacement: paso 6, imagen 1 de 1
    • Use a plastic opening tool to lift the bottom edge of the front cover.

  7. Blackberry Curve 9300 Speaker Replacement: paso 7, imagen 1 de 1
    • Use your nails to unclip the sides of the frame from the phone.

  8. Blackberry Curve 9300 Speaker Replacement: paso 8, imagen 1 de 1
    • Lift and remove the frame.

  9. Blackberry Curve 9300 Speaker Replacement: paso 9, imagen 1 de 1
    • Lift and remove the keyboard.

  10. Blackberry Curve 9300 Speaker Replacement, Speaker: paso 10, imagen 1 de 1
    • Locate and remove the two 5mm screws on top of the keyboard base with a T6 Torx screwdriver.

  11. Blackberry Curve 9300 Speaker Replacement: paso 11, imagen 1 de 1
    • Carefully pull keyboard base up and away from phone.

    • Disconnect keyboard base from phone completely.

  12. Blackberry Curve 9300 Speaker Replacement: paso 12, imagen 1 de 3 Blackberry Curve 9300 Speaker Replacement: paso 12, imagen 2 de 3 Blackberry Curve 9300 Speaker Replacement: paso 12, imagen 3 de 3
    • Remove the four 5mm screws on the top and bottom of phone with a T6 Torx screwdriver

  13. Blackberry Curve 9300 Speaker Replacement: paso 13, imagen 1 de 2 Blackberry Curve 9300 Speaker Replacement: paso 13, imagen 2 de 2
    • Using a prying tool, find the crease below the screen.

    • Insert where shown and use the tool to unclip the two sides of screen from body.

    • Prying tool goes approximately midway between the top and bottom edge of the screen.

  14. Blackberry Curve 9300 Speaker Replacement: paso 14, imagen 1 de 2 Blackberry Curve 9300 Speaker Replacement: paso 14, imagen 2 de 2
    • From the back of the phone, use your finger to push the front piece of the phone away from the back piece.

  15. Blackberry Curve 9300 Speaker Replacement: paso 15, imagen 1 de 1
    • Insert tweezers into the small holes on the top of the speaker.

  16. Blackberry Curve 9300 Speaker Replacement: paso 16, imagen 1 de 2 Blackberry Curve 9300 Speaker Replacement: paso 16, imagen 2 de 2
    • Lift the speaker up to remove the speaker from phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Alek Squires

Miembro Desde 09/30/13

431 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 14-7, Forte Fall 2013 Miembro de Cal Poly, Team 14-7, Forte Fall 2013

CPSU-FORTE-F13S14G7

5 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 9

Todo El Tiempo: 4,129