Saltar al contenido principal

Blackberry Curve 8330 LCD Panel Replacement

Qué necesitas

  1. Blackberry Curve 8330 LCD Panel Replacement, Remove Back Cover: paso 1, imagen 1 de 1
    • We did not have an actual back cover or battery for the phone we were given. Therefore, the first couple of steps will be without pictures.

    • Hold the phone with the back side facing you.

    • Press down on the silver tab towards the bottom end of the phone.

    • Carefully lift up the back casing to reveal the battery.

  2. Blackberry Curve 8330 LCD Panel Replacement, Remove Battery: paso 2, imagen 1 de 1
    • Put your finger on the top left corner of the battery and lift the battery up and out of its housing.

    • The phone should now look like this.

  3. Blackberry Curve 8330 LCD Panel Replacement, Keyboard: paso 3, imagen 1 de 1
    • Remove the two top screws using a T5 Torx screwdriver.

  4. Blackberry Curve 8330 LCD Panel Replacement: paso 4, imagen 1 de 2 Blackberry Curve 8330 LCD Panel Replacement: paso 4, imagen 2 de 2
    • Use a plastic opening tool to pry the edges of the bottom cover until it snaps loose.

    • The cover will now pull off easily.

  5. Blackberry Curve 8330 LCD Panel Replacement: paso 5, imagen 1 de 2 Blackberry Curve 8330 LCD Panel Replacement: paso 5, imagen 2 de 2
    • Use a plastic opening tool to pry between the front and back cover.

    • Start prying from wherever it is easiest to separate the silver and black plastic of the covers.

    • There are 5 securing clips on the front panel to disconnect.

    • Pry gently to prevent breaking the plastic clips when removing the front panel.

    • Once all the clips have been freed, the front cover will lift away from the phone.

  6. Blackberry Curve 8330 LCD Panel Replacement: paso 6, imagen 1 de 1
    • Lift the flexible keypad away from the device. It should come off easily.

  7. Blackberry Curve 8330 LCD Panel Replacement: paso 7, imagen 1 de 2 Blackberry Curve 8330 LCD Panel Replacement: paso 7, imagen 2 de 2
    • Use a T6 Torx Screwdriver to remove the four corner screws on the keyboard's housing.

    • Lift the keyboard frame away from the device.

    • There may be a small amount of adhesive at the bottom of the frame that needs to be pulled away.

  8. Blackberry Curve 8330 LCD Panel Replacement, LCD Panel: paso 8, imagen 1 de 2 Blackberry Curve 8330 LCD Panel Replacement, LCD Panel: paso 8, imagen 2 de 2
    • Detach each side casing by pulling them off gently from the phone.

  9. Blackberry Curve 8330 LCD Panel Replacement: paso 9, imagen 1 de 1
    • Remove the back housing from the mother board.

  10. Blackberry Curve 8330 LCD Panel Replacement: paso 10, imagen 1 de 1
    • Unhook the screen frame from the small tab at the top of the motherboard.

  11. Blackberry Curve 8330 LCD Panel Replacement: paso 11, imagen 1 de 2 Blackberry Curve 8330 LCD Panel Replacement: paso 11, imagen 2 de 2
    • Using a plastic opening tool, detach the connector on the LCD screen from the motherboard.

    • There may be some adhesive behind the LCD screen. If needed, pry the LCD screen away from the motherboard using the plastic opening tool.

    • Remove the LCD screen from the motherboard

Conclusión

To reassemble your device, follow these instructions in reverse order.

Joshua Ramos

Miembro Desde 04/04/12

65 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 14-11, Forte Spring 2012 Miembro de Cal Poly, Team 14-11, Forte Spring 2012

CPSU-FORTE-S12S14G11

5 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 1,554