Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Blackberry Curve 8320 Speaker Replacement

Qué necesitas

  1. Blackberry Curve 8320 Speaker Replacement, Battery: paso 1, imagen 1 de 2 Blackberry Curve 8320 Speaker Replacement, Battery: paso 1, imagen 2 de 2
    • Hold the phone with the back facing you.

    • Press the silver tab down and remove the cover.

  2. Blackberry Curve 8320 Speaker Replacement: paso 2, imagen 1 de 1
    • Pull up on the top edge of the battery to remove it.

  3. Blackberry Curve 8320 Speaker Replacement, Front Panel: paso 3, imagen 1 de 3 Blackberry Curve 8320 Speaker Replacement, Front Panel: paso 3, imagen 2 de 3 Blackberry Curve 8320 Speaker Replacement, Front Panel: paso 3, imagen 3 de 3
    • Use a plastic opening tool to gently pry the bottom cover loose.

    • Do not use excessive force at risk of damaging the antenna, which is under this casing.

    • Pull the cover from the front of the phone after the back is loose.

  4. Blackberry Curve 8320 Speaker Replacement: paso 4, imagen 1 de 2 Blackberry Curve 8320 Speaker Replacement: paso 4, imagen 2 de 2
    • Remove the two top screws with a T5 Torx screwdriver.

    • The screws are 8mm long.

  5. Blackberry Curve 8320 Speaker Replacement: paso 5, imagen 1 de 2 Blackberry Curve 8320 Speaker Replacement: paso 5, imagen 2 de 2
    • Gently pry off the side casings from the top.

    • The side casings cannot be fully removed yet because they are screwed on at the bottom.

    • You will not need to remove the sides on the bottom.

  6. Blackberry Curve 8320 Speaker Replacement: paso 6, imagen 1 de 1
    • Use a plastic opening tool to detach the securing clips holding the the front panel in place.

    • There are six securing clips total.

  7. Blackberry Curve 8320 Speaker Replacement: paso 7, imagen 1 de 1
    • Carefully remove the front panel.

    • You may need to apply some force in removing because the front panel is attached to the rest of the device with adhesive.

  8. Blackberry Curve 8320 Speaker Replacement, Speaker: paso 8, imagen 1 de 3 Blackberry Curve 8320 Speaker Replacement, Speaker: paso 8, imagen 2 de 3 Blackberry Curve 8320 Speaker Replacement, Speaker: paso 8, imagen 3 de 3
    • Use a T6 Torx screwdriver to remove the four screws located on the corners of the keyboard frame.

    • The screws are 6mm long.

  9. Blackberry Curve 8320 Speaker Replacement: paso 9, imagen 1 de 2 Blackberry Curve 8320 Speaker Replacement: paso 9, imagen 2 de 2
    • After the bottom two screws have been removed the side casings can be removed.

  10. Blackberry Curve 8320 Speaker Replacement: paso 10, imagen 1 de 3 Blackberry Curve 8320 Speaker Replacement: paso 10, imagen 2 de 3 Blackberry Curve 8320 Speaker Replacement: paso 10, imagen 3 de 3
    • Remove the back case.

    • The speaker is located on the back case.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

Cal Poly, Team 3-6, Regan Fall 2011 Miembro de Cal Poly, Team 3-6, Regan Fall 2011

CPSU-REGAN-F11S3G6

5 Miembros

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 1,987