Introducción

This guide will show you how to:

  • Remove the battery
  • Remove the front panel
  • Replace the keyboard

Partes

No se requieren partes.

Use a plastic opening tool to gently pry the bottom cover loose.
  • Use a plastic opening tool to gently pry the bottom cover loose.

  • Do not use excessive force at risk of damaging the antenna, which is under this casing.

  • Pull the cover from the front of the phone after the back is loose.

Agregar Comentario

Remove the two top screws with a T5 Torx screwdriver.
  • Remove the two top screws with a T5 Torx screwdriver.

  • The screws are 8mm long.

Agregar Comentario

  • Gently pry off the top of the side casings.

  • The side casings cannot be fully removed yet because they are screwed on at the bottom.

Agregar Comentario

  • Use a plastic opening tool to detach the securing clips holding the the front panel in place.

  • There are six securing clips total.

Agregar Comentario

  • Remove the front panel.

  • You may need to apply some force because the front panel is attached to the rest of the device with adhesive.

Agregar Comentario

  • Remove the keyboard.

  • Be careful not to bend or fold the keyboard, as it can break easily.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Yegor Pomortsev

Miembro Desde 12/10/11

123 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 3-6, Regan Fall 2011 Miembro de Cal Poly, Team 3-6, Regan Fall 2011

CPSU-REGAN-F11S3G6

5 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 1,905