Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Press the cover release button on the bottom of your device. Lift and remove the back cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
From the top, use your fingernail to lift the battery out.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the six 7.0mm Torx screws securing the rear case to the rest of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the plastic opening tool to remove the rear case.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the same plastic opening tool, lift out the motherboard assembly.
-
Remove the motherboard assembly from left to right, using caution near the audio jack on the right side of the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a spudger, pry the top of the metal casing off. There are two pins holding it in place; it should pop off easily.
-
Repeat to the bottom.
-
Cancelar: No complete esta guía.
5 personas más completaron esta guía.