Saltar al contenido principal

Introducción

To replace or install a SIM card in your Blackberry 7520, follow this guide.

Herramientas

No se especificaron herramientas.

Partes

No se especificaron partes.

  1. Turn the phone upside down. Push down on the black button on the back of the phone to slide the rear panel off.
    • Turn the phone upside down.

    • Push down on the black button on the back of the phone to slide the rear panel off.

    • The battery should be visible now.

  2. Hold the BlackBerry in one hand face-up with the screen facing towards you. Gently smack the phone against your hand to dislodge the battery. Gently smack the phone against your hand to dislodge the battery.
    • Hold the BlackBerry in one hand face-up with the screen facing towards you.

    • Gently smack the phone against your hand to dislodge the battery.

  3. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  4. Push back on the black slot, then grab hold on top of the black slot and pull back so the SIM card and black slot pull back. Push back on the black slot, then grab hold on top of the black slot and pull back so the SIM card and black slot pull back. Push back on the black slot, then grab hold on top of the black slot and pull back so the SIM card and black slot pull back.
    • Push back on the black slot, then grab hold on top of the black slot and pull back so the SIM card and black slot pull back.

  5. Remove the SIM card by sliding it out of the black tray. Insert  the replacement SIM card with the gold plated side with lines facing down. Fold the black tray down with the SIM card in and push forward until the tray "slides" into place.
    • Remove the SIM card by sliding it out of the black tray.

    • Insert the replacement SIM card with the gold plated side with lines facing down. Fold the black tray down with the SIM card in and push forward until the tray "slides" into place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Nathan

Miembro Desde 18/01/10

31 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 5-7, Forte Winter 2010 Miembro de Cal Poly, Team 5-7, Forte Winter 2010

CPSU-FORTE-W10S5G7

5 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

Todo El Tiempo: 3,969