Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the phone upside down.
-
Push down on the black button on the back of the phone to slide the rear panel off.
-
The battery should be visible now.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Hold the BlackBerry in one hand face-up with the screen facing towards you.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a T6 Torx screwdriver to remove the 6 screws holding the rear of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a pick or plastic opening tool to push the clips holding the rear away from you.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Repeat the process of unlatching the clips for the top section of the Blackberry.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Slide the rear panel forward to reveal the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the indicated screws using a T6 Torx screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the motherboard.
-
Remove the indicated screw using the T6 Torx screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull the metal plate away from the front panel of the cell phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place the faceplate face-down and the interior of the phone face-up, as shown.
-