Repara tus cosas Comunidad Tienda

BlackBerry Curve 8900 Speaker Replacement

Introducción

A simple guide on how to replace your broken BlackBerry Curve 8900 speaker. How to disassemble a Blackberry Curve Smartphone for beginners!

Qué necesitas

  1. BlackBerry Curve 8900 Speaker Replacement, Battery: paso 1, imagen 1 de 1

    • Remove the back cover of the phone.

    • The battery will now be visible.

    Editar

  2. BlackBerry Curve 8900 Speaker Replacement: paso 2, imagen 1 de 2 BlackBerry Curve 8900 Speaker Replacement: paso 2, imagen 2 de 2

    • Pinch the battery at the grey semi-circles on the top left and top right corners of the battery using your fingers and remove it from the device.

    Editar

  3. BlackBerry Curve 8900 Speaker Replacement, Motherboard: paso 3, imagen 1 de 1

    • Remove the lower rear cover, using a small iFixit opening tool.

    Editar

  4. BlackBerry Curve 8900 Speaker Replacement: paso 4, imagen 1 de 1

    • Remove the six screws from the mid-frame of the device, using the T6 Torx Screwdriver.

    • Set the screws aside once they've been removed.

    Editar

  6. BlackBerry Curve 8900 Speaker Replacement: paso 5, imagen 1 de 1

    • Gently remove the mid-frame from the phone, exposing the motherboard.

    • This is the motherboard.

    Editar

  7. BlackBerry Curve 8900 Speaker Replacement: paso 6, imagen 1 de 2 BlackBerry Curve 8900 Speaker Replacement: paso 6, imagen 2 de 2

    • Gently pull back the plastic tabs that secure the motherboard to the case.

    • Slowly pull the tabs, working your way around the case, until they are lifted and the motherboard is free.

    • Remove the motherboard.

    • The keypad and navigation ball may become loose and fall off the motherboard.

    Editar

  8. BlackBerry Curve 8900 Speaker Replacement: paso 7, imagen 1 de 2 BlackBerry Curve 8900 Speaker Replacement: paso 7, imagen 2 de 2

    • Carefully detach the antenna from the two clips on the side of the motherboard.

    • Disconnect the antenna from the motherboard in the same manner.

    Editar

  9. BlackBerry Curve 8900 Speaker Replacement: paso 8, imagen 1 de 1

    • Carefully disconnect the ribbon cable located on the bottom right of the motherboard.

    Editar

  10. BlackBerry Curve 8900 Speaker Replacement: paso 9, imagen 1 de 2 BlackBerry Curve 8900 Speaker Replacement: paso 9, imagen 2 de 2

    • Locate the chip underneath the screen.

    • Gently remove the screen, without applying too much pressure, taking care not to damage it.

    Editar

  11. BlackBerry Curve 8900 Speaker Replacement: paso 10, imagen 1 de 2 BlackBerry Curve 8900 Speaker Replacement: paso 10, imagen 2 de 2

    • Lift up the motherboard from the bottom edge to reveal the ribbon cables.

    • Carefully disconnect the two ribbon cables connecting the motherboard to the display on either side.

    • Remove the motherboard and place off to the side.

    Editar

  12. BlackBerry Curve 8900 Speaker Replacement, Speaker: paso 11, imagen 1 de 1

    • Replace the entire center piece of the case to replace the speaker.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 10 otros colaboradores

Johnny Tran

Miembro Desde 09/10/11

473 Reputación

4 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

Cuesta, Team 1-3, Zipperian Fall 2011 Miembro de Cuesta, Team 1-3, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G3

3 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 7,855