Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
Work area should be lint free, clean and well lit.
Qué necesitas
-
-
Open the rear panel to expose the battery and the chassis assembly.
-
Remove the battery.
-
-
-
Use a T6 Torx screwdriver to loosen and remove the six screws from the chassis as shown. Place the screws together somewhere they will not be misplaced.
-
Flip the phone over to the front and remove the plastic bezel. (the piece that has "blackberry" written on it located directly above the screen)
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
4 personas más completaron esta guía.