BlackBerry 8820 Trackball Replacement

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Introducción

This guide will demonstrate how to remove the trackball on a BlackBerry 8820. To reassemble the device, please follow the instructions provided in reverse order.

Always exercise caution when handling electronic components.

Qué necesitas

Paso 1 Disassembling BlackBerry 8820 Outer Casing

BlackBerry 8820 Trackball Replacement, Disassembling BlackBerry 8820 Outer Casing: paso 1, imagen 1 de 1

Remove the battery cover by applying pressure and sliding down the silver square on the back of the phone.

Traducir

Paso 2

Remove the battery by prying under it with your finger or the plastic opening tool.
Remove the four small 3/8" long screws using a 1/16" diameter torx screwdriver.

Traducir

Paso 3

Use a nylon spudger to carefully remove the two side bars of plastic.

Traducir

Paso 4

Use a nylon spudger to carefully pry the back casing off.
There are two small clamps on each edge that need to be unhooked before the casing will come off.

Traducir