Introducción

This Repair guide will walk you through the steps on how to replace a RIM Blackberry 8700c logic board.

Partes

No se requieren partes.

  1. Remove the back cover by pushing down on the button and sliding the cover towards the bottom of the phone.
    • Remove the back cover by pushing down on the button and sliding the cover towards the bottom of the phone.

    • Set the cover aside. The battery will now be exposed.

    Agregar Comentario

  2. Remove the battery by pulling back on the notch on top edge of the battery.
    • Remove the battery by pulling back on the notch on top edge of the battery.

    • Set the battery aside.

    Agregar Comentario

    • Unscrew and remove all four T6 Torx screws.

    Agregar Comentario

    • Pull the back cover of the phone off and set it aside.

    Agregar Comentario

    • Unscrew and remove all 4 T6 Torx screws.

    Agregar Comentario

    • Lift and remove inner back cover and set aside.

      • A small side piece may fall away but is simple to reattach.

    • Remove logic board by gently lifting it off of the front cover of the phone.

      • New logic board can now simply be set in place.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

arlebrun

Miembro Desde 02/12/09

1 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 18-4, Maness Fall 2009 Miembro de Cal Poly, Team 18-4, Maness Fall 2009

CPSU-MANESS-F09S18G4

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 3,099