Introducción

The keypad is the external part of the keyboard consisting of the rubber buttons. This keypad rests in the front case.

Partes

No se requieren partes.

With your thumb press down on the locking- button on the back of the BlackBerry 7280.
  • With your thumb press down on the locking- button on the back of the BlackBerry 7280.

  • Slide the battery cover off the device.

Agregar Comentario

Remove the lithium-ion battery from the back of the device using your index finger.
  • Remove the lithium-ion battery from the back of the device using your index finger.

Agregar Comentario

  • Hold the device with both hands.

  • Lift the SIM card holder using your thumb and index finger.

  • Remove the SIM card from the device.

Agregar Comentario

  • Using a Torx T6 screwdriver, remove all six 1/8 inch screws (marked in red) from the back case. Set screws aside.

  • The SIM card has been removed here to prevent damage to the card. This is recommended, but not not required.

Agregar Comentario

  • Use the plastic opening tool to pry the back case away from the front case.

Agregar Comentario

  • Using a Torx T6 screwdriver, remove the lone 1/8 inch screw that holds the upper metal bracket onto the larger metal bracket. Set aside the screw and the bracket.

Agregar Comentario

  • Remove the front plastic case from the metal bracket.

Agregar Comentario

  • The keypad sits in the keyboard slots on the front cover. Simply peel the keyboard off and replace.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

Clemson, Team 12-2, Benson Spring 2013 Miembro de Clemson, Team 12-2, Benson Spring 2013

CLEM-BENSON-S13S12G2

4 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 145