Repara tus cosas Comunidad Tienda

Black and Decker JS660 Blade Holder Replacement

Introducción

The jigsaw blade may become loose or is not fastening correctly when using the blade. This guide will identify the problem and show the user how to fix and interchange the holder.

Qué necesitas

  1. Black and Decker JS660 Blade Holder Replacement, Base: paso 1, imagen 1 de 2 Black and Decker JS660 Blade Holder Replacement, Base: paso 1, imagen 2 de 2

    • Unscrew the eight screws to open up the jigsaw.

    Traducir

  2. Black and Decker JS660 Blade Holder Replacement: paso 2, imagen 1 de 1

    • Use a screwdriver to remove the first screws securing the base to the jigsaw.

    • Remove the second screw.

    • Remove the base of the jigsaw.

    Traducir

  4. Black and Decker JS660 Blade Holder Replacement: paso 3, imagen 1 de 2 Black and Decker JS660 Blade Holder Replacement: paso 3, imagen 2 de 2

    • With the old jigsaw base off, replace it with the new base by following the steps in the reverse order.

    • Assemble the base on a steady surface.

    Traducir

  5. Black and Decker JS660 Blade Holder Replacement, Blade Holder: paso 4, imagen 1 de 2 Black and Decker JS660 Blade Holder Replacement, Blade Holder: paso 4, imagen 2 de 2

    • You will need to take out the entire blade clamp shown.

    • The plastic part is fragile, easy to break

    Traducir

  6. Black and Decker JS660 Blade Holder Replacement: paso 5, imagen 1 de 3 Black and Decker JS660 Blade Holder Replacement: paso 5, imagen 2 de 3 Black and Decker JS660 Blade Holder Replacement: paso 5, imagen 3 de 3

    • Showing the entire blade clamp removed from the device.

    • Apply some oil grease if dry/needed

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 4 otros colaboradores

Andrew Khouri

Miembro Desde 02/08/16

468 Reputación

4 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

USF Tampa, Team 6-2, Eyestone Spring 2016 Miembro de USF Tampa, Team 6-2, Eyestone Spring 2016

USFT-EYESTONE-S16S6G2

4 Miembros

4 Guías creadas

Un comentario

What a great website… I could never have known how to replace the blade holder… Or that I could get the correct parts…I got the replacement part. Then removed the old one, and replaced the new one. NO problem at all.. Thanks to Andrew and this website… With out it, would have to pay some one at a big price, and wait to have it fixed, as would have to send it off for the repair.. Or….. Just throw it away…

Thanks every one… I will share this site for sure…

navy1aedon - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 24

Todo El Tiempo: 3,358