Introducción
In the Black and Decker CHV1510, the battery pack is one of the main components to fail. This guide will show you how to replace the battery pack in your vacuum.
Qué necesitas
-
-
Remove the six exterior 2 mm Phillips #0 screws securing the 2 halves of the white shell together.
-
-
-
-
Holding the battery pack firmly, disconnect the red and black wires from the battery pack by pulling them gently.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
Un comentario
The battery pack in no longer available and the 14 cells would cost more than a brand new dustbuster (Feb 25, 2021). I managed to get almost 10-years out of my CHV1510.