Repara tus cosas Comunidad Tienda

Black and Decker DustBuster 15.6V Suction Rubber Seal Replacement

Introducción

Replacing suction seal which is the cause of loss performance and/or air leak.

Qué necesitas

  1. Black and Decker DustBuster 15.6V Suction Rubber Seal Replacement, Suction Rubber Seal: paso 1, imagen 1 de 1

    • Press to blue unlock buttons at the base of the nozzle in word and pull forward .

    Editar

  2. Black and Decker DustBuster 15.6V Suction Rubber Seal Replacement: paso 2, imagen 1 de 1

    • Locate rubber suction seal.

    Editar

  4. Black and Decker DustBuster 15.6V Suction Rubber Seal Replacement: paso 3, imagen 1 de 1

    • Insert a metal spudger in between white plastic and rubber seal and gently drag spudger around see you lifting gently much like opening a can.

    Editar

  5. Black and Decker DustBuster 15.6V Suction Rubber Seal Replacement: paso 4, imagen 1 de 1

    • Align slits on the bottom of new suction seal then press into those slits.

    • The seal should not come above white plastic.

    • If the nozzle does not connect to vacuum barrel, readjust seal and try to attach nozzle until it snaps into place.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Roberto Perez

Miembro Desde 03/31/17

101 Reputación

1 Guía escrita

Insignias: 2

Equipo

UMass Dartmouth, Team S6-G1, Isaacson Spring 2017 Miembro de UMass Dartmouth, Team S6-G1, Isaacson Spring 2017

UMASSD-ISAACSON-S17S6G1

4 Miembros

9 Guías creadas

Un comentario

Where can I buy a new suction seal.

Alison Junk - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 7

Ultimos 30 días: 21

Todo El Tiempo: 2,288