Repara tus cosas Comunidad Tienda

Black and Decker DustBuster 15.6V Nozzle Brush Replacement

Introducción

The nozzle brush located on the end of shaft may break off during the cleaning process. Replacing the brush is as easy as breaking it off.

Qué necesitas

  1. Black and Decker DustBuster 15.6V Nozzle Brush Replacement, Nozzle Brush: paso 1, imagen 1 de 1

    • Lift Nozzle Brush until it clicks into fully erect position.

    Editar

  2. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: paso 2, imagen 1 de 1

    • Apply a gentle, equal pressure outward, to the inside of both brush legs.

    Editar

  4. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: paso 3, imagen 1 de 1

    • Remove one of the leg prongs from the hole it is inserted into.

    Editar

  5. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: paso 4, imagen 1 de 1

    • Rotate the free leg forwards or backwards from the hole.

    • This relieves the pressure from the inside of the legs allowing you to freely remove the last leg from its hole.

    Editar

  6. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: paso 5, imagen 1 de 1

    • Check each leg hole for debris and clear whats needed.

    • Insert a leg of the new brush into the correct hole, so the brush will click into its erect position.

    • Slide the other leg into its respective hole.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Jacob

Miembro Desde 03/15/17

101 Reputación

1 Guía escrita

Insignias: 2

Equipo

UMass Dartmouth, Team S6-G1, Isaacson Spring 2017 Miembro de UMass Dartmouth, Team S6-G1, Isaacson Spring 2017

UMASSD-ISAACSON-S17S6G1

4 Miembros

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 12

Todo El Tiempo: 321