Repara tus cosas

Derecho a reparar

Tienda

Bissell Pet Hair Eraser Power Button Replacement

Escrito Por: Jim Lopez (y 3 de otros participantes)
  • Comentarios: 0
  • Favoritos: 0

Dificultad

Fácil

Pasos

4

Tiempo Requerido

3 minutos

Secciones

2

Banderas

0

Introducción

The Bissell Pet Hair Eraser power button commands the vacuum on and off. Before disassembling the case to check the power button for proper operation, visit our troubleshooting guide for vacuum won’t turn on.

Herramientas

Comprar estas herramientas

Partes

No se especificaron partes.

  1. Firmly grasp the handle and press the release button. Gently pull the dirt cup down and away from the vacuum body.

    • Firmly grasp the handle and press the release button.

    • Gently pull the dirt cup down and away from the vacuum body.

    Traducir

  2. Remove the six 1.2 mm Philips #2 screws from the handle and base. Remove the six 1.2 mm Philips #2 screws from the handle and base.

    • Remove the six 1.2 mm Philips #2 screws from the handle and base.

    Traducir

  4. Grasp each half of the body and gently pull apart. The green handle, power button, charge light lens, and dirt cup release are not fastened in place.

    • Grasp each half of the body and gently pull apart.

    • The green handle, power button, charge light lens, and dirt cup release are not fastened in place.

    • Once the case is split apart these items may come dislodged.

    Traducir

  5. The power button can be removed by gently lifting it off the circuitry. The power button can be removed by gently lifting it off the circuitry. The power button can be removed by gently lifting it off the circuitry.

    • The power button can be removed by gently lifting it off the circuitry.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 12

Todo El Tiempo: 255