Repara tus cosas Comunidad Tienda

Bissell Pet Hair Eraser Motorized Brush Belt Replacement

Introducción

Occasionally, the motorized brush can stop functioning due to a failure in the belt. This guide shows how to replace the belt inside the motorized brush.

Qué necesitas

  1. Bissell Pet Hair Eraser Motorized Brush Belt Replacement, Motorized Brush: paso 1, imagen 1 de 2 Bissell Pet Hair Eraser Motorized Brush Belt Replacement, Motorized Brush: paso 1, imagen 2 de 2

    • Turn power OFF.

    • Detach motorized brush from the vacuum.

    Editar

  2. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: paso 2, imagen 1 de 2 Bissell Pet Hair Eraser Motorized Brush Belt Replacement: paso 2, imagen 2 de 2

    • Use a spudger or a coin to turn the circular lock clockwise to unlock the brush roll.

    • Remove the lock cover.

    Editar

  3. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: paso 3, imagen 1 de 1

    • Lift brush out of the enclosure.

    Editar

  5. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: paso 4, imagen 1 de 3 Bissell Pet Hair Eraser Motorized Brush Belt Replacement: paso 4, imagen 2 de 3 Bissell Pet Hair Eraser Motorized Brush Belt Replacement: paso 4, imagen 3 de 3

    • Remove the four 13.0 mm Phillips #0 screws and remove the green cover.

    Editar

  6. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: paso 5, imagen 1 de 1

    • Take out the motor assembly.

    Editar

  7. Bissell Pet Hair Eraser Motorized Brush Belt Replacement, Motorized Brush Belt: paso 6, imagen 1 de 1

    • Take the belt off the gear by using a spudger.

    Editar

  8. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: paso 7, imagen 1 de 3 Bissell Pet Hair Eraser Motorized Brush Belt Replacement: paso 7, imagen 2 de 3 Bissell Pet Hair Eraser Motorized Brush Belt Replacement: paso 7, imagen 3 de 3

    • Grab the new belt and slide it on to the two gears.

    • Place the motor assembly back into the motorized brush enclosure.

    Editar
Conclusión

To reassemble your device, follow the motorized brush disassembly instructions in reverse order.

Autor

con 3 otros colaboradores

Roman Dyagilev

Miembro Desde 11/11/17

217 Reputación

2 Guías creadas

Insignias: 3

Equipo

IUPUI, Team S4-G4, Wilson Fall 2017 Miembro de IUPUI, Team S4-G4, Wilson Fall 2017

IUPUI-WILSON-F17S4G4

3 Miembros

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 406