Saltar al contenido principal

Bissell Bolt ION 2-in-1 Cordless Brush Replacement

  1. Bissell Bolt ION 2-in-1 Cordless Brush Replacement, Brush Roll: paso 1, imagen 1 de 3 Bissell Bolt ION 2-in-1 Cordless Brush Replacement, Brush Roll: paso 1, imagen 2 de 3 Bissell Bolt ION 2-in-1 Cordless Brush Replacement, Brush Roll: paso 1, imagen 3 de 3
    • Push the release button on the back side of the device near the swivel head, to detach the swivel for convenient access to the brush roll.

  2. Bissell Bolt ION 2-in-1 Cordless Brush Replacement: paso 2, imagen 1 de 3 Bissell Bolt ION 2-in-1 Cordless Brush Replacement: paso 2, imagen 2 de 3 Bissell Bolt ION 2-in-1 Cordless Brush Replacement: paso 2, imagen 3 de 3
    • The guard notch will automatically be down in the locked position.

    • Slide the guard notch to the unlocked position.

  3. Bissell Bolt ION 2-in-1 Cordless Brush Replacement: paso 3, imagen 1 de 2 Bissell Bolt ION 2-in-1 Cordless Brush Replacement: paso 3, imagen 2 de 2
    • Lift up the latch to the right of the guard notch to access the brush.

    • While holding up the latch remove the brush.

    • Hold up latch to place new brush roll back into place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

CSU Fullerton, Team S1-G3, Bruce Fall 2017 Miembro de CSU Fullerton, Team S1-G3, Bruce Fall 2017

CSUF-BRUCE-F17S1G3

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 693