Saltar al contenido principal

Bionaire BAP 600 Transformer Replacement

Qué necesitas

  1. Bionaire BAP 600 Transformer Replacement, Control Board: paso 1, imagen 1 de 1
    • Unplug 7 pin connector

  2. Bionaire BAP 600 Transformer Replacement: paso 2, imagen 1 de 1
    • Unplug 2 pin wires which connects the front LED's.

  3. Bionaire BAP 600 Transformer Replacement: paso 3, imagen 1 de 2 Bionaire BAP 600 Transformer Replacement: paso 3, imagen 2 de 2
    • Remove two screws

  4. Bionaire BAP 600 Transformer Replacement: paso 4, imagen 1 de 1
    • Unplug pins

    • Use scissors to cut zip ties

  5. Bionaire BAP 600 Transformer Replacement: paso 5, imagen 1 de 3 Bionaire BAP 600 Transformer Replacement: paso 5, imagen 2 de 3 Bionaire BAP 600 Transformer Replacement: paso 5, imagen 3 de 3
    • Unplug rest of pin connections

    • Remove Neutral and Hot wires

    • They are the two black wires

    • Pull them out

  6. Bionaire BAP 600 Transformer Replacement: paso 6, imagen 1 de 3 Bionaire BAP 600 Transformer Replacement: paso 6, imagen 2 de 3 Bionaire BAP 600 Transformer Replacement: paso 6, imagen 3 de 3
    • Unscrew two screws

    • Inspect capacitor for any bulges ( if it has a bulge , it means it is need to be replaced)

    • Check for burnt solder in the back of circuit board

  7. Bionaire BAP 600 Transformer Replacement, Transformer: paso 7, imagen 1 de 2 Bionaire BAP 600 Transformer Replacement, Transformer: paso 7, imagen 2 de 2
    • Use screwdriver to remove screws

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

IUPUI, Team 4-4, Baechle Fall 2016 Miembro de IUPUI, Team 4-4, Baechle Fall 2016

IUPUI-BAECHLE-F16S4G4

5 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 195