Repara tus cosas Comunidad Tienda

Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement

Introducción

Follow these instructions to remove the throttle cable, either to replace it or to service the throttle control.

Qué necesitas

  1. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: paso 1, imagen 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: paso 1, imagen 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: paso 1, imagen 3 de 3

    • Cut and remove any zip ties securing the throttle cable.

    Traducir

  2. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 2, imagen 1 de 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 2, imagen 2 de 2

    • Use a Phillips #2 driver to remove the screw securing the lower end of the throttle cable.

    Traducir

  3. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 3, imagen 1 de 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 3, imagen 2 de 2

    • Remove the bracket securing the lower end of the throttle cable.

    Traducir

  5. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 4, imagen 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 4, imagen 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 4, imagen 3 de 3

    • Rotate the lower end of the throttle cable to detach it from the throttle.

    Traducir

  6. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 5, imagen 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 5, imagen 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 5, imagen 3 de 3

    • When reinstalling the throttle control cable, check to make sure that the throttle control moves the throttle through its full range of motion.

    • If necessary, loosen the screw securing the lower end of the throttle cable and adjust the position of the cable. Re-tighten the screw and check to make sure that the throttle moves through its full range of motion.

    Traducir

  7. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 6, imagen 1 de 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 6, imagen 2 de 2

    • Use a 7/16" wrench or deep socket to remove the cap from the throttle control.

    Traducir

  8. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 7, imagen 1 de 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 7, imagen 2 de 2

    • Advance the throttle control to expose the gear rack containing the upper end of the throttle cable.

    Traducir

  9. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 8, imagen 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 8, imagen 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 8, imagen 3 de 3

    • Separate the gear rack from the upper end of the throttle cable.

    • Lift and remove the gear rack from the throttle control.

    • If the gear rack doesn't fully detach, advance the throttle control lever a little farther.

    • Lubricate the gear rack with a bit of lithium grease during reassembly.

    Traducir

  10. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 9, imagen 1 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 9, imagen 2 de 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: paso 9, imagen 3 de 3

    • Use a 1/2" wrench to unscrew the upper end of the throttle cable from the throttle control.

    • Slide the throttle cable down out of the bottom of the throttle control, and remove the cable.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

Jeff Suovanen

Miembro Desde 08/06/13

427,862 Reputación

259 Guías creadas

Insignias: 48

+ 45 más insignias

Equipo

iFixit Miembro de iFixit

Staff

135 Miembros

16,732 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 5

Ultimos 30 días: 20

Todo El Tiempo: 1,868