Saltar al contenido principal

Besta Super 5000 Back Cover Replacement

Qué necesitas

  1. Besta Super 5000 Back Cover Replacement, Battery: paso 1, imagen 1 de 1
    • Turn the device over so that the barcode is facing upwards.

  2. Besta Super 5000 Back Cover Replacement: paso 2, imagen 1 de 2 Besta Super 5000 Back Cover Replacement: paso 2, imagen 2 de 2
    • Place your fingers on the battery cover arrow and pull the cover down and off the device.

  3. Besta Super 5000 Back Cover Replacement: paso 3, imagen 1 de 1
    • Pull upwards on the battery tab to remove the battery from the device.

  4. Besta Super 5000 Back Cover Replacement, Back Cover: paso 4, imagen 1 de 1
    • Remove the five screws around the edge of the device using a Phillips #0 screwdriver.

  5. Besta Super 5000 Back Cover Replacement: paso 5, imagen 1 de 1
    • Remove the two screws behind the battery using a Phillips #0 screwdriver.

  6. Besta Super 5000 Back Cover Replacement: paso 6, imagen 1 de 2 Besta Super 5000 Back Cover Replacement: paso 6, imagen 2 de 2
    • Potential for device damage: All screws must be removed before you begin this step. Do not forcefully pry apart the device with screws still in it because you may damage it.

    • Gently pry off the backing using an opening tool.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Jessie

Miembro Desde 09/30/14

370 Reputación

3 Guías creadas

Equipo

Ohio State, Team 1-5, Buehl Fall 2014 Miembro de Ohio State, Team 1-5, Buehl Fall 2014

OSU-BUEHL-F14S1G5

4 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 10

Ultimos 30 días: 11

Todo El Tiempo: 289