Repara tus cosas Comunidad Tienda

Bem Wireless HL2739B Speaker Replacement

Introducción

Actions speak louder than words especially when your speaker's broken. Speak up and follow this guide.

Qué necesitas

  1. Bem Wireless HL2739B Speaker Replacement, Speaker Battery: paso 1, imagen 1 de 1

    • Peel the rubber cover back from the corner of the speaker to reveal the screw.

    • Repeat for the three remaining corners.

    Editar

  2. Bem Wireless HL2739B Speaker Replacement: paso 2, imagen 1 de 3 Bem Wireless HL2739B Speaker Replacement: paso 2, imagen 2 de 3 Bem Wireless HL2739B Speaker Replacement: paso 2, imagen 3 de 3

    • Use the J1 bit attached to the screwdriver to remove the four 10mm screws from the bottom of the speaker.

    Editar

  3. Bem Wireless HL2739B Speaker Replacement: paso 3, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Lift the bottom cover away from the rest of the speaker.

    • There are wires connecting the battery and cover to the rest of the speaker. Be careful when removing the base cover.

    • Using the tweezers, pull the wires from the speaker's internal chip.

    • Be careful not to damage the chip when you remove the wires.

    • It will likely require soldering to reassemble the speaker after this step.

    Editar

  4. Bem Wireless HL2739B Speaker Replacement: paso 4, imagen 1 de 1

    • Using a plastic opening tool, gently pry the battery from the metal base.

    Editar

  6. Bem Wireless HL2739B Speaker Replacement: paso 5, imagen 1 de 1

    • Using tweezers, pull the wires from the metal base connection.

    Editar

  7. Bem Wireless HL2739B Speaker Replacement, Speaker Motherboard: paso 6, imagen 1 de 2 Bem Wireless HL2739B Speaker Replacement, Speaker Motherboard: paso 6, imagen 2 de 2

    • Unscrew the four 10mm screws from the motherboard.

    Editar

  8. Bem Wireless HL2739B Speaker Replacement: paso 7, imagen 1 de 2 Bem Wireless HL2739B Speaker Replacement: paso 7, imagen 2 de 2
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Using tweezers, remove the blue/white and red/black wires from motherboard.

    Editar

  9. Bem Wireless HL2739B Speaker Replacement: paso 8, imagen 1 de 2 Bem Wireless HL2739B Speaker Replacement: paso 8, imagen 2 de 2

    • Gently re-position the motherboard so you can access the bus wire connected to the speaker.

    • Remove bus wire from the speaker and lift out the motherboard.

    Editar

  10. Bem Wireless HL2739B Speaker Replacement, Speaker: paso 9, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Using tweezers remove excess glue that may be covering the screw holes of the speaker's driver.

    Editar

  11. Bem Wireless HL2739B Speaker Replacement: paso 10, imagen 1 de 2 Bem Wireless HL2739B Speaker Replacement: paso 10, imagen 2 de 2

    • Remove the four 10mm screws from speaker's base.

    Editar

  12. Bem Wireless HL2739B Speaker Replacement: paso 11, imagen 1 de 2 Bem Wireless HL2739B Speaker Replacement: paso 11, imagen 2 de 2

    • Using the metal spudger, pry up on the speaker's base.

    • This will require a moderate amount of force.

    • Pull the wire from the speaker's driver's base from the hole it was in.

    Editar

  13. Bem Wireless HL2739B Speaker Replacement: paso 12, imagen 1 de 2 Bem Wireless HL2739B Speaker Replacement: paso 12, imagen 2 de 2

    • Remove the two 5mm screws from the speaker.

    • Lift the driver from the speaker.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Ryan McQueeney

Miembro Desde 02/28/17

446 Reputación

4 Guías creadas

Insignias: 6

+ 3 más insignias

Equipo

USF Tampa, Team S2-G4, Nance Spring 2017 Miembro de USF Tampa, Team S2-G4, Nance Spring 2017

USFT-NANCE-S17S2G4

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 4

Ultimos 30 días: 10

Todo El Tiempo: 995