Repara tus cosas Comunidad Tienda

Bella 4-Slice Toaster Oven Outer Shell Replacement

Introducción

Removing the black metal outer shell of the toaster is an important first step in replacing most major toaster components. This easy-to-follow guide makes it easy to remove and replace.

Qué necesitas

  1. Bella 4-Slice Toaster Oven Outer Shell Replacement, Outer Shell: paso 1, imagen 1 de 1

    • Remove five 11.6 mm Phillips #2 screws from the rear of the device.

    Editar

  2. Bella 4-Slice Toaster Oven Outer Shell Replacement: paso 2, imagen 1 de 1

    • Open the front glass door of the toaster oven.

    Editar

  3. Bella 4-Slice Toaster Oven Outer Shell Replacement: paso 3, imagen 1 de 1

    • Locate retaining screw on the upper-middle portion of the door frame.

    Editar

  5. Bella 4-Slice Toaster Oven Outer Shell Replacement: paso 4, imagen 1 de 1

    • Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.

    Editar

  6. Bella 4-Slice Toaster Oven Outer Shell Replacement: paso 5, imagen 1 de 1

    • Flip toaster onto back panel with feet facing forward.

    Editar

  7. Bella 4-Slice Toaster Oven Outer Shell Replacement: paso 6, imagen 1 de 1

    • Use spudger to pry the grey rubber inserts from the black plastic feet.

    Editar

  8. Bella 4-Slice Toaster Oven Outer Shell Replacement: paso 7, imagen 1 de 1

    • Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.

    Editar

  9. Bella 4-Slice Toaster Oven Outer Shell Replacement: paso 8, imagen 1 de 1

    • Lift the black outer cover off of the toaster

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 3

Todo El Tiempo: 381