Saltar al contenido principal

Beiens Cartoon RC Race Car Remote Control Antenna Replacement

Qué necesitas

  1. Beiens Cartoon RC Race Car Remote Control Antenna Replacement, Remote Control Antenna: paso 1, imagen 1 de 1
    • Flip the remote control and unscrew all the six 6.5 mm screws with the Phillips #00 screwdriver.

  2. Beiens Cartoon RC Race Car Remote Control Antenna Replacement: paso 2, imagen 1 de 1
    • Pull the device apart to find the connection between the antenna and the white wire.

  3. Beiens Cartoon RC Race Car Remote Control Antenna Replacement: paso 3, imagen 1 de 1
    • Unscrew the 4.5 mm screw that attaches the antenna in place.

  4. Beiens Cartoon RC Race Car Remote Control Antenna Replacement: paso 4, imagen 1 de 1
    • Replace the old antenna with a new one. Attach the new antenna to the white wire and screw it in place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Amber Ashley

Miembro Desde 10/01/15

329 Reputación

4 Guías creadas

Equipo

USF Tampa, Team 1-6, Leahy Fall 2015 Miembro de USF Tampa, Team 1-6, Leahy Fall 2015

USFT-LEAHY-F15S1G6

3 Miembros

8 Guías creadas

Un comentario

Where can I get a replacement antenna for the remote control?

eziegler92 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 22

Todo El Tiempo: 789