Repara tus cosas Comunidad Tienda

Beats Studio 2.0 Wireless Left Interior Side Panel Replacement

Introducción

The casing and structure of Beats by Dre Studio 2.0 over-ear headphones directly influence their sound quality. When the interior side panel is compromised, a proper seal (to one's ears) is not achievable, and ultimately sound quality is severely lessened. This guide will provide thorough instructions on how to replace the interior side paneling and restore optimal sound quality.

Qué necesitas

  1. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement, Left Interior Side Panel: paso 1, imagen 1 de 1

    • Use metal spudger to pry away ear cushion.

    Traducir

  2. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 2, imagen 1 de 1

    • Remove ear cushion from headphones (attached by adhesive).

    Traducir

  3. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 3, imagen 1 de 1

    • Remove two screws from the metal hinge using a Phillips head screwdriver to allow more motion from the speaker housing and more accessibility.

    Traducir

  4. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 4, imagen 1 de 1

    • Remove five screws using a Phillips head screwdriver from speaker housing.

    Traducir

  6. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 5, imagen 1 de 1

    • Pull speaker away to access second secondary housing.

    • Be careful not to stress wires and break solder points.

    Traducir

  7. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 6, imagen 1 de 2 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 6, imagen 2 de 2

    • Raise center cover.

    • Remove screw from center of housing.

    Traducir

  8. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 7, imagen 1 de 1

    • Pull secondary housing away gently being careful not to damage the wires.

    Traducir

  9. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 8, imagen 1 de 1

    • Remove four screws using a Phillips head screwdriver to remove the third housing.

    Traducir

  10. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 9, imagen 1 de 3 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 9, imagen 2 de 3 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 9, imagen 3 de 3

    • Disconnect wires gently.

    • Be gentle with the wires ensuring to pull them through with care to eliminate possible shortages.

    Traducir

  11. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 10, imagen 1 de 3 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 10, imagen 2 de 3 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 10, imagen 3 de 3

    • Pass wire through new housing and reconnect wires.

    Traducir

  12. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: paso 11, imagen 1 de 1

    • Snap housing into place.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Antares Cam

Miembro Desde 02/27/18

235 Reputación

1 Guía escrita

Insignias: 7

+ 4 más insignias

Equipo

colby and cameron Miembro de colby and cameron

Community

2 Miembros

1 Guía escrita

2 comentarios

Thank you for your tutorial!

Jonathan Concepcion - Contestar

appreciate it, fixed both side panels on my beats

mridha31 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 16

Ultimos 30 días: 31

Todo El Tiempo: 5,620