Base Replacement

Introducción

This guide shows the steps to replace the parts in the base.

Remove the four Phillips #0 screws (9.4mm) located at the bottom of the phone on the back side of the base.

Use the spudger to separate the bottom from the top.
There are two clips, located top and bottom, that you have to compress with the spudger.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Miembro Desde 02/08/16

442 Reputación

3 Guías creadas

IUPUI-BAECHLE-S16S1G4

4 Miembros

16 Guías creadas