Repara tus cosas Únete a la comunidad Tienda

Backbone One Right Trigger Replacement

Introducción

Use this guide to replace the right trigger on your Backbone One.

Qué necesitas

  1. Backbone One Right Trigger Replacement, Remove the screws: paso 1, imagen 1 de 1

    • Use a Phillips screwdriver to remove the four 5.9 mm-long screws.

    Editar

  2. Backbone One Right Trigger Replacement, Rotate the upper part: paso 2, imagen 1 de 3 Backbone One Right Trigger Replacement, Rotate the upper part: paso 2, imagen 2 de 3 Backbone One Right Trigger Replacement, Rotate the upper part: paso 2, imagen 3 de 3

    • Lift up the upper cover of the controller.

    • Swing the upper cover over and place it on the controller case.

    • Make sure that the interconnecting cable has no tension.

    Editar

  3. Backbone One Right Trigger Replacement, Remove the protective tape: paso 3, imagen 1 de 3 Backbone One Right Trigger Replacement, Remove the protective tape: paso 3, imagen 2 de 3 Backbone One Right Trigger Replacement, Remove the protective tape: paso 3, imagen 3 de 3

    • Use a pair of tweezers to remove the yellow protective tape which is placed over the interconnect cable and the connector.

    Editar

  5. Backbone One Right Trigger Replacement, Open the interconnect cable ZIF connector: paso 4, imagen 1 de 3 Backbone One Right Trigger Replacement, Open the interconnect cable ZIF connector: paso 4, imagen 2 de 3 Backbone One Right Trigger Replacement, Open the interconnect cable ZIF connector: paso 4, imagen 3 de 3

    • Use the tip of an opening pick to open the gray flap of the interconnect cable ZIF connector by pushing it upwards.

    Editar

  6. Backbone One Right Trigger Replacement, Disconnect the interconnect cable: paso 5, imagen 1 de 2 Backbone One Right Trigger Replacement, Disconnect the interconnect cable: paso 5, imagen 2 de 2

    • Disconnect the cable by pulling it straight out the ZIF connector.

    Editar

  7. Backbone One Right Trigger Replacement, Disconnect the phone connector cables: paso 6, imagen 1 de 3 Backbone One Right Trigger Replacement, Disconnect the phone connector cables: paso 6, imagen 2 de 3 Backbone One Right Trigger Replacement, Disconnect the phone connector cables: paso 6, imagen 3 de 3

    • Use a pair of tweezers to disconnect the phone connector cables out from their sockets.

    Editar

  8. Backbone One Right Trigger Replacement, Separate the upper case: paso 7, imagen 1 de 1

    • Separate the the upper case of the left controller handle.

    Editar

  9. Backbone One Right Trigger Replacement, Remove the screws: paso 8, imagen 1 de 1

    • Use a Phillips screwdriver to remove the three 5.9 mm-long screws.

    Editar

  10. Backbone One Right Trigger Replacement, Remove the trigger: paso 9, imagen 1 de 2 Backbone One Right Trigger Replacement, Remove the trigger: paso 9, imagen 2 de 2

    • Remove the trigger.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Opening didn’t go as planned? Answers community for help.

Autor

Adriana Zwink

Miembro Desde 12/18/19

45,150 Reputación

167 Guías creadas

Insignias: 35

+ 32 más insignias

Equipo

iFixit Miembro de iFixit

Community

142 Miembros

16,154 Guías creadas

2 comentarios

where can I buy a right trigger replacement?

pelony felony - Contestar

where can I buy a right trigger replacement?

Ricardo Gazo Rosario - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 6

Ultimos 30 días: 19

Todo El Tiempo: 562