Introducción
Use this guide to replace a broken phone connector on your Backbone One.
Qué necesitas
-
-
Lift up the upper cover of the controller.
-
Swing the upper cover over and place it on the controller case.
-
-
-
Use a Phillips screwdriver to remove the two 4.8 mm-long screws securing the phone connector.
-
-
-
-
Use your fingers to thread the phone connecter through the opening in the plastic cover at the right side of the rear cover.
-
-
-
Use a pair of tweezers to disconnect the first phone connector cable from the mainboard.
-
-
-
Use a pair of tweezers to disconnect the second phone connector cable from the mainboard.
-
-
-
Remove the phone connector cable.
where to buy ?
Where to buy?
Where can I buy this cable?
Any update on this if this could work?
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Ask our Answers community for help.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Ask our Answers community for help.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
4 comentarios
Unfortunately we haven't found any replacement parts yet. If you find a website that offers replacement parts feel free to share your experience with us.
Where can I find the connector
My son bent the connector cable. Where do I buy a new one?
Please update as soon as possible!
