Saltar al contenido principal

Baby Einstein Take Along Tunes LED Replacement

Qué necesitas

  1. Baby Einstein Take Along Tunes LED  Replacement, LED: paso 1, imagen 1 de 1
    • Place the device face down on a flat surface, so that the screws on the back are facing the ceiling.

  2. Baby Einstein Take Along Tunes LED  Replacement: paso 2, imagen 1 de 1
    • Using a screwdriver loosen the four screws connecting the body of the device together.

  3. Baby Einstein Take Along Tunes LED  Replacement: paso 3, imagen 1 de 1
    • Once unscrewed, pop the back of the device off using the plastic opening tool.

  4. Baby Einstein Take Along Tunes LED  Replacement: paso 4, imagen 1 de 1
    • Once unscrewed, take the back of the body and put it aside. We will be working with the front part of the device.

  5. Baby Einstein Take Along Tunes LED  Replacement: paso 5, imagen 1 de 1
    • Using a screwdriver loosen the screws on the lights panel.

  6. Baby Einstein Take Along Tunes LED  Replacement: paso 6, imagen 1 de 1
    • Using a plastic opening tool pop the light panel off. Be careful as to not rip any of the wires from the panel.

  7. Baby Einstein Take Along Tunes LED  Replacement: paso 7, imagen 1 de 2 Baby Einstein Take Along Tunes LED  Replacement: paso 7, imagen 2 de 2
    • Carefully pull the LED lights off with a pair of tweezers. Once off, put in and connect a replacement.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Shreya Sunny

Miembro Desde 09/04/15

607 Reputación

6 Guías creadas

Equipo

USF Tampa, Team 2-2, Sullivan Fall 2015 Miembro de USF Tampa, Team 2-2, Sullivan Fall 2015

USFT-SULLIVAN-F15S2G2

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 668