• Lift your car with a carlift.

    • Place a transmissionjack under your transmission.

    • Remove the transmissioncarrier.

    • Remove the heatshield (you can remove one screw and bend it back).

    • Remove the servomotor (four ET10 screws and the cable).

    • Remove the motor by uscrewing the four T25 screws.

    • Remove the gasket with the metalplate.

    • Remove the snapring and the washer underneath.

    • Remove the plasticgear.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Veit Aulenberg

Miembro Desde 05/12/18

169 Reputación

1 Guía escrita

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 24

Todo El Tiempo: 25