Saltar al contenido principal

Introducción

Installing new LED backup lights are actually very easy. While this guide demonstrates it on a BMW F10 M5, you can use this as a guide to install any other LED reverse light since the concept is the same.

Herramientas

No se especificaron herramientas.

Partes

  1. Gain access to the back of the trunk
    • Gain access to the back of the trunk

    • Remove some clips that hold the trunk liner in place.

    • Tip: You don't have to remove all the clips, just enough so you have enough access.

  2. Pull out the bulb tray.
    • Pull out the bulb tray.

    • Press the two clips on the side to release.

  3. Remove the bulb and swap it out with the new LED bulb. Remove the bulb and swap it out with the new LED bulb.
    • Remove the bulb and swap it out with the new LED bulb.

  4. Test to see if the LED reverse lights work and enjoy. Test to see if the LED reverse lights work and enjoy.
    • Test to see if the LED reverse lights work and enjoy.

Conclusión

Installation will take absolutely no time at all and you will be on your way to some new LED reverse lights.

2 personas más completaron esta guía.

Eric Wu

Miembro Desde 21/01/15

2,793 Reputación

23 Guías creadas

Any idea how to do this on the Station Wagon/ Tourer model F11d

The liner does not have easily removable clips. The tool box cover reveals several screws and 2 recessed expanding plastic catches which I cant get out . Removed all the screws has not impact.

Thanks

david meredith - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 10

Últimos 30 Días: 69

Todo El Tiempo: 6,047