Repara tus cosas Comunidad Tienda

BMW 2003-2010 5 Series Tail Light Bulb Replacement

Introducción

This guide will help you replace a burnt out tail light on your 2003-2010 BMW 5 Series car. Neglecting regular car maintenance such as changing a tail light can cause many problems including a ticket or worst.

This is a quick and easy job that any one can do and you’ll save money too. Follow this step-by-step guide to change the tail light on your 2003-2010 BMW 5 Series.

Qué necesitas

  1. BMW 2003-2010 5 Series Tail Light Bulb Replacement, Tail light Bulb: paso 1, imagen 1 de 1

    • Open the trunk of the car to access the tail lights.

    • Remove the two 5 mm screws holding the panel cover in place.

    Traducir

  2. BMW 2003-2010 5 Series Tail Light Bulb Replacement: paso 2, imagen 1 de 1

    • With a flathead screwdriver, turn the screws half a turn counterclockwise.

    Traducir

  3. BMW 2003-2010 5 Series Tail Light Bulb Replacement: paso 3, imagen 1 de 1

    • With plyers, remove the screws.

    Traducir

  5. BMW 2003-2010 5 Series Tail Light Bulb Replacement: paso 4, imagen 1 de 3 BMW 2003-2010 5 Series Tail Light Bulb Replacement: paso 4, imagen 2 de 3 BMW 2003-2010 5 Series Tail Light Bulb Replacement: paso 4, imagen 3 de 3

    • Pull up the trunk matt and remove it from the corner.

    • Pull up the panel by the tab.

    • The panel should lift right out.

    Traducir

  6. BMW 2003-2010 5 Series Tail Light Bulb Replacement: paso 5, imagen 1 de 3 BMW 2003-2010 5 Series Tail Light Bulb Replacement: paso 5, imagen 2 de 3 BMW 2003-2010 5 Series Tail Light Bulb Replacement: paso 5, imagen 3 de 3

    • You will see the light bulb holster.

    • Turn the dial in the middle of of the black plastic light bulb holster.

    • Pull the holster out of the trunk bay.

    Traducir

  7. BMW 2003-2010 5 Series Tail Light Bulb Replacement: paso 6, imagen 1 de 1

    • Grab the light bulb at the base and twist counterclockwise.

    • DO NOT TWIST THE BULB BY THE GLASS.

    Traducir

  8. BMW 2003-2010 5 Series Tail Light Bulb Replacement: paso 7, imagen 1 de 1

    • Pull out the bulb and repeat the process in reverse order with the new bulb to reassemble.

    Traducir
Conclusión

To reassemble, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 1 otro colaborador

Christophe Chedid

Miembro Desde 03/22/21

169 Reputación

1 Guía escrita

Insignias: 4

+1 mas insignia

Equipo

UMass Dartmouth, Team S3-G5, Saloman Spring 2021 Miembro de UMass Dartmouth, Team S3-G5, Saloman Spring 2021

UMASSD-SALOMAN-S21S3G5

1 Miembro

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 15

Ultimos 30 días: 98

Todo El Tiempo: 2,713