Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the plastic opening tool or your fingernail to pry off the back cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the plastic opening tool or your fingernail to pry off the battery from the top right corner.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a screwdriver to remove each of the four screws.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Take the plastic opening tool and insert it in the crease between the front screen and the inner back cover.
-
Slide the plastic opening tool along the edge of the phone to pry the two covers apart.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the plastic opening tool between the black pad and the circuit board. Then gently pry off the black pad.
-
This will make the connections of the charging port more accessible.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a soldering iron and a pair of pliers, melt the soldering connections around the headphone jack.
-
Quickly pull off the current headphone jack while the soldering connections are still soft.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Mount the new headphone jack such that the prongs of the headphone jack line up with the soldering connections.
-
Using a soldering iron, solder the connections in place.
-