Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Qué necesitas
-
-
Use the plastic opening tool or your fingernail to pry off the back cover.
-
-
-
Use the plastic opening tool or your fingernail to pry off the battery from the top right corner.
-
-
-
-
Take the plastic opening tool and insert it in the crease between the front screen and the inner back cover.
-
Slide the plastic opening tool along the edge of the phone to pry the two covers apart.
-
-
-
Insert the plastic opening tool between the black pad and the circuit board. Then gently pry off the black pad.
-
This will make the connections of the charging port more accessible.
-
-
-
Using a soldering iron and a pair of pliers, melt the soldering connections around the headphone jack.
-
Quickly pull off the current headphone jack while the soldering connections are still soft.
-
-
-
Mount the new headphone jack such that the prongs of the headphone jack line up with the soldering connections.
-
Using a soldering iron, solder the connections in place.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Equipo
UMass Dartmouth, Team 6-8, Vijaybhaskar Fall 2014 Miembro de UMass Dartmouth, Team 6-8, Vijaybhaskar Fall 2014
UMASSD-VIJAYBHASKAR-F14S6G8
4 Miembros
5 Guías creadas
